|
|
| |
| Fixed NC magnetic flaw detector(CDG) CDG-15000\12000\9000\6000 |
Characteristics and functions:
PLC. A series of action can be carried on automatically. You can also operate the machine by hand.
○AC phasic controlled circuit breaker
○Resultant magnetization, automatic attenuation demagnetization.
○Pneumatic/dynamoelectric clamping .
○Two contact heads can be rotated in-phase.
○Voltage adjusted by controllable silicon. continuous magnetization electric current change. safeguard of over loading such as current, voltage, and temperature .
○NC.
○Fluorescent magnetic flaw detecting
Applying workpieces:
different kinds of shafts, rollers and rings, such as: crank, camshaft, joint shaft, valve, bolt, pin, pipe, pipe tie-in, rollers, bearing rings, wheel, steel pipe, gear, shafts, and so on. |
 |
| CDG-15000\12000\9000\6000 main parameters |
type |
CDG-15000D |
CDG-12000D |
CDG-9000D |
CDG-9000C |
CDG-6000D |
CDG-6000C |
magnetizing current |
0~15000A |
0~12000A |
0~9000A |
0~6000A |
magnetometive force |
0~28000AT |
0~24000AT |
0-18000AT |
0-15000AT |
contact heads distance |
0~1500, 2500,3500mm |
coil diameter |
ф600~ ф800 |
ф400~ ф600 |
main function |
rotating |
not rotating |
rotating |
not rotating |
PLC |
PLC, 60~120 sound per workpiece, automatic demagnetization |
electrical source: |
380V 1200A |
380V 900A |
380V 600A 50Hz |
380V 450A 50Hz |
|
| |
 |
CDG-4000\3000\2000\1000main parameters
|
type |
CDG-4000D |
CDG-4000C |
CDG-2000H |
CDG-2000D |
CDG-1000D |
CDG-1000H |
magnetizing current |
0~4000A |
0~2000A |
0~1000A |
magnetometive force |
0~12000AT |
0-16000AT |
0-12000AT |
contact heads distance |
0~1500, 2500mm |
0~800mm |
0~1000mm |
0~800mm |
0~550mm |
coil diameter |
ф300~ ф400 |
ф250~ ф350 |
yoke |
detecting efficiency |
30~60 sounds per workpiece |
6~20 sounds per workpiece |
5~15 sounds per workpiece |
electrical source: |
380V 180A 50Hz |
380V 90A 50Hz |
380V 55A 50Hz |
|
|
Products